AVP panel

The AVP panel produces a decorative shadow line creating a distinctive architectural effect with semi-concealed fasteners. Ribs are 1 1/8" deep and major corrugations spaced 12" on center. The net coverage of panel is 3'-0 ".

Gauge:  26 and 24
Length: Maximum recommended 40'. Longer lengths available on special order.
Dimensions:  36" wide by 1 1 /8" deep
Finish: Galvalume Plus®, Signature® 200 & 300 colors
Usage:  Wall panel, liner panel, soffit panel, mansard panel face and back sheet. Galvalume Plus® is a registered trademark of BIEC International, Inc. Signature® is a registered trademark of the NCI Group, Inc.

Advantages
  1. Attractive architectural application
  2. Eliminating end laps improves appearance and enhances ease of installation
  3. Reduces the potential for oil canning
  4. Reduces glare and the potential for oil canning
  5. Premium paint finishes with 25 year warranty
  6. AVP carries a UL® "Class A" fire rating

Ultra-Dek® is a registered trademark of NCI Group, Inc.
Galvalume Plus® is a registered trademark of BIEC International, Inc.
Signature® is a registered trademark of the NCI Group Inc.

PBR Panel

The PBR panel's deep ribs create an even-shadowed appearance. The area between the major ribs is reinforced with minor ribs. PBR is one of the most economical panel systems and can be used for both roof and wall applications.

Gauge: 26 gauge (standard), 24 gauge and 22 gauge
Length: 45' maximum length is standard but longer lengths are available by special request
Dimensions: 36" by 1 1/4"
Finish: Galvalume Plus®, Signature® 200 Colors, or Signature® 300 Colors
Usage: Roof, wall, liner, mansard, and soffit panel applications

Advantages
  1. The panel can serve as an alternate wall panel by putting the paint finish on the under side
  2. An additional leg is rolled on one side of lap rib to facilitate installation
  3. Flexible installation
  4. Cost effective
  5. Ease of installation
  6. The panel qualifies for UL® 90 in multiple construction numbers
  7. The panel configuration enhances diaphragm capabilities for purlin stability
  8. Profile light transmitting panels are available for the PBR panel
  9. Used with long-life fasteners this panel has a 25-year warranty

NOTE: Oil-canning is not considered grounds for rejection of any panel system. Oil-canning can occur in any panel with wide flat sections. Heavier gauge, embossing, striations, flatter sub-frame systems and support from a solid sub-deck can all help to minimize oil-canning.

ShadowRib

ShadowRib™ panel combines aesthetics, economics and function to bring definition to metal structures. This panel is a proven performer and a versatile tool to the designer. Structural strength in the Metalcor Shadowrib panel is accomplished without sacrificing appearance or design flexibility. The fluted face creates distinctive shadow lines.

Gauge: 26 gauge (standard) and 22 gauge
Length: Maximum recommended 40'-0"
Dimensions: 16" wide by 3" high
Finish: Galvalume Plus®, Signature® 200 Colors, or Signature® 300 Colors
Usage: The Metalcor Shadowrib panel can be used for walls, fascia’s and equipment screens. Apply the panel over light-gauge framing, purlins, girts, structural steel and joists.

Advantages
  1. Enhances architectural application
  2. 25-year finish warranty
  3. 25-year premium paint finish warranty, ultimate resistance to chalking and color changes
  4. Enhances appearance by eliminating end laps and improves ease of installation
  5. Embossing the metal reduces glare and the potential for oil-canning
  6. Panels carry a UL® "Class A" fire rating
  7. The panel can be applied to light gauge framing, purlins, girts, structural steel and joist
  8. In many instances, the panel can span from floor to ceiling without interior support
  9. Ready for application of a variety of insulation methods into the 3" cavity


Galvalume Plus® is a registered trademark of BIEC International, Inc. Signature® is a registered trademark of the NCI Group. ShadowRib™ is a registered trademark of the NCI Group.
REQUEST QUOTE