PBR Panel

The PBR panel's deep ribs create an even-shadowed appearance. The area between the major ribs is reinforced with minor ribs. PBR is one of the most economical panel systems and can be used for both roof and wall applications.

Gauge: 26 gauge (standard), 24 gauge and 22 gauge
Length: 45' maximum length is standard but longer lengths are available by special request
Dimensions: 36" by 1 1/4"
Finish: Galvalume Plus®, Signature® 200 Colors, or Signature® 300 Colors
Usage: Roof, wall, liner, mansard, and soffit panel applications

Advantages
  1. The panel can serve as an alternate wall panel by putting the paint finish on the under side
  2. An additional leg is rolled on one side of lap rib to facilitate installation
  3. Flexible installation
  4. Cost effective
  5. Ease of installation
  6. The panel qualifies for UL® 90 in multiple construction numbers
  7. The panel configuration enhances diaphragm capabilities for purlin stability
  8. Profile light transmitting panels are available for the PBR panel
  9. Used with long-life fasteners this panel has a 25-year warranty

NOTE: Oil-canning is not considered grounds for rejection of any panel system. Oil-canning can occur in any panel with wide flat sections. Heavier gauge, embossing, striations, flatter sub-frame systems and support from a solid sub-deck can all help to minimize oil-canning.

Double-Lok

Double-Lok® is a metal standing seam roofing product attached to sub-framing using a variety of concealed, interlocking clips that provide for minimum panel penetrations. Double-Lok panels can be used on new construction as well as retrofit on existing structures. This panel design provides a high degree of weathertightness and has been tested by independent laboratories in accordance with ASTM E283 and E331 (for air infiltration, water penetration, and wind uplift).

Gauge: 24 gauge (standard), or 22 gauge
Length: 50' maximum is standard but longer lengths available by special request
Dimensions: 24" wide by 3" high (standard), 18" and 12" also available
Finish: Galvalume Plus®, Signature® 200 Colors, or Signature® 300 Colors
Usage: New and retrofit applications

Advantages
  1. Assures a weathertight building envelope
  2. Maximizes field installation efficiency with installation allowed from either end of building or on both sides simultaneously
  3. Allows solid connection at end laps plus proper fastener spacing; Pre-punched holes facilitate installation and assure proper panel placement
  4. Maximizes weathertightness
  5. Assures specifiers of minimal air infiltration and water penetration
  6. 25-year finish warranty
  7. Maximizes insulation systems options including 1" thermal spacers at the purlins
  8. Facilitates weathertight construction and ease of installation
  9. Lowers insurance costs
  10. Adds to customer confidence

Ultra-Dek® is a registered trademark of NCI Group, Inc. Galvalume Plus® is a registered trademark of BIEC International, Inc. Signature® is a registered trademark of the NCI Group Inc.

Ultra-Dek

Ultra-Dek is a metal standing seam roofing product attached by using a variety of concealed, interlocking clips that provide for minimum panel penetrations. This panel can be used on new construction as well as retrofit on existing structures. The Ultra-Dek panel is designed to provide a high degree of weathertightness and has been tested by independent laboratories in accordance with ASTM E1680 and E1646 (for air infiltration and water penetration).

Gauge: 24 (standard), and 22 (available on special request) Length: 55' maximum standard and longer lengths available by special request
Dimensions: 24" wide by 3" high (standard), 18" and 12" also available
Finish: Galvalume Plus®, Signature® 200 Colors, or Signature® 300 Colors
Usage: This panel is a structural panel that spans up to five feet on purlins, or can be used as an architectural panel over solid deck. This flat panel is designed with striations as an option to minimize oil-canning.

Advantages
  1. Specially designed to seal out the elements
  2. Contributes to the system’s weather tight construction and ease of installation
  3. Field installation can commence or finish from either end of the building
  4. Solid connection at end laps and proper fastener spacing, the pre-punched holes improve installation and ensure proper panel placement
  5. Accommodates variety of insulation systems including 1" thermal spacers at the purlin
  6. Lower insurance costs
  7. No need for seaming equipment and ease of installation

Ultra-Dek® is a registered trademark of NCI Group, Inc. Galvalume Plus® is a registered trademark of BIEC International, Inc. Signature® is a registered trademark of the NCI Group Inc.

SuperLok

The SuperLok® standing seam roof system blends the aesthetics of an architectural panel with the strength of a structural panel. This panel has earned uplift ratings that are the highest in the industry for standing seam roofs, assuring the reliability of performance. This panel is FM Global approved to satisfy stringent code requirements and is ICBO approved.

Gauge: 24 gauge (standard), and 22 gauge
Length: The maximum recommended length is 50
Dimensions: 16" wide and 2" high (standard) and12" also available
Finish: Galvalume Plus®, Signature® 200 Colors, or Signature® 300 Colors
Usage: SuperLok® is a field seamed panel that combines a slim rib with exceptional uplift resistance. This panel has been designed to withstand the most rigorous conditions. This system was designed to be installed over open framing, 5/8" plywood, or a composite roof assembly.

Advantages
  1. Maximizes flexibility
  2. May be installed in both directions or simultaneously
  3. Provides for expansion and contraction
  4. Reduces labor, enhances system life
  5. Customer assurance of quality and long life
  6. May qualify for reduced insurance rates
  7. Longer life
  8. Meets stringent code requirements such as Factory Mutual
  9. This panel is Factory Mutual approved to satisfy stringent code requirements and is ICBO approved
  10. These clips hold the panels firmly in place without unsightly exposed fasteners; Each clip system offers the ability to accommodate thermal movement
  11. This panel meets or exceeds the design requirements for application in South Florida

SuperLok® is a registered trademark of the NCI Group. Galvalume Plus® is a registered trademark of BIEC International, Inc. Signature® is a registered trademark of the NCI Group.
NOTE: Oil-canning is not considered grounds for rejection of any panel system. Oil-canning can occur in any panel with wide flat sections. Heavier gauge, embossing, striations, flatter sub-frame systems and support from a solid sub-deck can all help to minimize oil-canning.

BattenLok HS

A unique feature of the BattenLok HS® panel is a vertical leg side joint that is mechanically seamed with an electric seamer for a weathertight finish. This panel features concealed clips and easy to handle 16" or 12" wide panels custom cut to the desired length. BattenLok HS® HS can be installed directly over purlins or bar joists. It does not require a solid substructure for support. This roof system has several different UL® 90 construction numbers.

Gauge: 24 gauge (standard) and 22 gauge
Length: Maximum 50' (standard), other lengths are available as special requests
Dimensions: 16" wide and 2" high (standard) and 12" also available
Finish: Galvalume Plus®, Signature® 200 Colors, or Signature® 300 Colors
Usage: panel is a structural panel that spans up to five feet on purlins, or can be used as an architectural panel over solid deck. This flat panel is designed with striations as an option to minimize oil-canning. It is designed to meet the ever-changing specifications and other industry codes.

Advantages
  1. Insures watertightness and easier erection
  2. Improves erection and enhances watertightness
  3. Minimizes oil canning
  4. Flexible and convenient erection
  5. Creates a trimless eave
  6. Increases weathertightness and improves appearance
  7. Minimizes air infiltration and water penetration and enhances acceptability among specifiers
  8. Better transition to hip, valleys, and roof openings
  9. High energy efficiency system
  10. Allows roof to expand and contract maximizing weathertightness
  11. Provides of varying insulation thickness
  12. 25 year finish warranty
  13. Reduces insurance costs
  14. Helps with oil canning

Ultra-Dek® is a registered trademark of NCI Group, Inc. Galvalume Plus® is a registered trademark of BIEC International, Inc. Signature® is a registered trademark of the NCI Group Inc.
REQUEST QUOTE