COR-125

The panel's deep ribs create an even-shadowed appearance. The area between the major ribs is reinforced with minor ribs. COR-125 is one of the most economical panel systems and can be used for both roof and wall applications.

Gauge	Length	Dimensions	Finish	Usage
26 gauge (standard), 24 gauge	45' maximum length is standard but longer lengths are available by special request	36" by 1 1/4"	Galvalume Plus®, Standard Colours	Roof, wall, liner, mansard, and soffit panel applications

Advantages

1. The panel can serve as an alternate wall panel by putting the paint finish on the under side
2. An additional leg is rolled on one side of lap rib to facilitate installation
3. Flexible installation
4. Cost effective
5. Ease of installation
6. The panel configuration enhances diaphragm capabilities for purlin stability
7. Used with long-life fasteners this panel has a 25-year warranty

NOTE: Oil-canning is not considered grounds for rejection of any panel system. Oil-canning can occur in any panel with wide flat sections.

COR-78

The metal wall panel is ideal for a variety of marketplaces, including residential, light commercial, agricultural and storage facilities. The Corrugated metal wall panel can be used in both vertical and horizontal applications.

Applications	Coverage	Rib Spacing	Rib Height	Panel Attachment	Gauges	Finishes	Coatings
Roof and Wall	Widths: 36"	2 3/4" on center	1/2" - Minimum slope: 3:12	Exposed Fastening System	29 (standard); 26	Smooth (standard)	Galvalume Plus®, Standard Colours

COR-78 LOK

The metal wall panel is ideal for a variety of marketplaces, including residential, light commercial, agricultural and storage facilities. The Corrugated metal wall panel can be used in both vertical and horizontal applications.

Applications	Coverage	Rib Spacing	Rib Height	Panel Attachment	Gauges	Finishes	Coatings
Roof and Wall	Widths: 30"	2 3/4" on center	1/2" - Minimum slope: 3:12	Exposed Fastening System	29 (standard); 26	Smooth (standard)	Galvalume Plus®, Standard Colours